Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

iMac Intel 27" EMC 2546 Fan Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. iMac Intel 27" EMC 2546 Fan Replacement, Remove the fan: passo 1, imagem 1 %32 iMac Intel 27" EMC 2546 Fan Replacement, Remove the fan: passo 1, imagem 2 %32 iMac Intel 27" EMC 2546 Fan Replacement, Remove the fan: passo 1, imagem 3 %32
    • Use the tip of a spudger to disconnect the fan cable's connector from its socket on the logic board.

  2. iMac Intel 27" EMC 2546 Fan Replacement: passo 2, imagem 1 %32 iMac Intel 27" EMC 2546 Fan Replacement: passo 2, imagem 2 %32
    • Peel the black tape connecting the fan to the exhaust duct back slightly.

    • Leave the tape in place on the exhaust duct—you only need to expose the joint to free the fan.

  3. iMac Intel 27" EMC 2546 Fan Replacement: passo 3, imagem 1 %32
    • Remove three 12.4 mm T10 screws securing the fan to the rear case.

  4. iMac Intel 27" EMC 2546 Fan Replacement: passo 4, imagem 1 %32 iMac Intel 27" EMC 2546 Fan Replacement: passo 4, imagem 2 %32
    • Remove the fan from the iMac.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Membro desde: 10/17/09

502.275 Reputação

Autoria de 407 guias

Equipe

iFixit Membro de iFixit

Staff

Membros da 136

Autoria de 16.573 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 292