Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

iMac Intel 27" EMC 2429 Hard Drive Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. iMac Intel 27" EMC 2429 Hard Drive Replacement, Hard Drive: passo 1, imagem 1 %32 iMac Intel 27" EMC 2429 Hard Drive Replacement, Hard Drive: passo 1, imagem 2 %32
    • Disconnect the SATA power and data cables from the hard drive by pulling them straight away from the hard drive.

  2. iMac Intel 27" EMC 2429 Hard Drive Replacement: passo 2, imagem 1 %32 iMac Intel 27" EMC 2429 Hard Drive Replacement: passo 2, imagem 2 %32
    • Remove the two T10 Torx screws securing the hard drive to the iMac frame.

    • Slightly rotate the top edge of the hard drive away from the outer case.

    • Lift the hard drive off its two lower positioning pins and remove it from the outer case.

  3. iMac Intel 27" EMC 2429 Hard Drive Replacement: passo 3, imagem 1 %32 iMac Intel 27" EMC 2429 Hard Drive Replacement: passo 3, imagem 2 %32
    • Remove the two T8 Torx screws securing the upper bracket to the hard drive.

    • Remove the upper bracket from the hard drive.

    • Remove the two T8 Torx pins from the other side of the hard drive.

  4. iMac Intel 27" EMC 2429 Hard Drive Replacement: passo 4, imagem 1 %32
    • Carefully peel off the piece of EMI foam attached to the front of the hard drive.

    • Don't forget to transfer this to your new hard drive.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Phillip Takahashi

Membro desde: 08/22/11

86.632 Reputação

Autoria de 87 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 10

Últimos 30 dias: 21

Duração total: 405