Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

Prereq only

  1. Disconnect the SATA power and data cables from the hard drive by pulling them straight away from the hard drive. Disconnect the SATA power and data cables from the hard drive by pulling them straight away from the hard drive.
    • Disconnect the SATA power and data cables from the hard drive by pulling them straight away from the hard drive.

  2. Remove the two T10 Torx screws securing the hard drive to the iMac frame. Slightly rotate the top edge of the hard drive away from the outer case.
    • Remove the two T10 Torx screws securing the hard drive to the iMac frame.

    • Slightly rotate the top edge of the hard drive away from the outer case.

    • Lift the hard drive off its two lower positioning pins and remove it from the outer case.

  3. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Confira os kits

    Enough RAM
    For All The Tabs

    Confira os kits
  4. Remove the two T8 Torx screws securing the upper bracket to the hard drive. Remove the upper bracket from the hard drive.
    • Remove the two T8 Torx screws securing the upper bracket to the hard drive.

    • Remove the upper bracket from the hard drive.

    • Remove the two T8 Torx pins from the other side of the hard drive.

  5. Carefully peel off the piece of EMI foam attached to the front of the hard drive.
    • Carefully peel off the piece of EMI foam attached to the front of the hard drive.

    • Don't forget to transfer this to your new hard drive.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Phillip Takahashi

Membro desde: 22/08/2011

80.918 Reputação

87 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 6

Duração total: 80