Pular para o conteúdo principal

Introdução

Remove the glass panel to gain access to your iMac's internals.

Peças

Nenhum componente especificado.

    • The glass panel is fixed onto the front bezel with fourteen magnets around its perimeter.

    • Stick two suction cups to opposing corners of the glass panel.

    • To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.

    • If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent such as Windex.

  1. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  2. Gently pull the glass panel straight up off the iMac.
    • Gently pull the glass panel straight up off the iMac.

    • The glass panel has several positioning pins around its perimeter. To avoid shearing these pins off the glass panel, be sure to only pull straight up during removal.

    • Be meticulous about cleaning the LCD and the inside face of the glass panel before reinstallation, as any fingerprints or dust trapped inside will be annoyingly visible when the display is on.

Conclusão

To reassemble your device, follow these instructions in reverse order.

25 outras pessoas concluíram este guia.

Brittany McCrigler

Membro desde: 05-03-2012

81.434 reputação

132 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

104 Membros

8.366 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 13

Últimos 30 dias: 75

Todo: 15,164