Ir para o conteúdo principal

Introdução

Prereq only for stripping down the logic board.

  1. The SATA data connector has a clip that must be pressed to allow removal. While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board. While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.
    • The SATA data connector has a clip that must be pressed to allow removal.

    • While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.

  2. Grasp the hard drive power connector and gently pull it out of its socket on the logic board. Grasp the hard drive power connector and gently pull it out of its socket on the logic board.
    • Grasp the hard drive power connector and gently pull it out of its socket on the logic board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Membro desde: 05/02/2015

213.050 Reputação

178 Guias de autoria

Equipe

The Home Depot Membro de The Home Depot

Community

8.911 Membros

1.023 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 49