Ir para o conteúdo principal

Introdução

Prerequisite only.

Peças

Nenhum componente especificado.

  1. Gently pull the fan cable connector straight out of its socket on the logic board. Gently pull the fan cable connector straight out of its socket on the logic board.
    • Gently pull the fan cable connector straight out of its socket on the logic board.

  2. Remove the three 10 mm T10 Torx screws securing the fan to the rear enclosure.
    • Remove the three 10 mm T10 Torx screws securing the fan to the rear enclosure.

    • The uppermost screw has a rubber standoff adhered to its head to support the display—leave this in place.

  3. Remove the fan from the iMac. Remove the fan from the iMac.
    • Remove the fan from the iMac.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Membro desde: 05/02/2015

213.100 Reputação

178 Guias de autoria

Equipe

The Home Depot Membro de The Home Depot

Community

8.942 Membros

1.024 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 69