Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

Prereq only for removing the AirPort/Bluetooth card from the logic board.

Peças

Nenhum componente especificado.

  1. Remove the two 3.3 mm T5 Torx screws securing the AirPort/Bluetooth card to the logic board.
    • Remove the two 3.3 mm T5 Torx screws securing the AirPort/Bluetooth card to the logic board.

  2. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  3. Slightly lift the AirPort/Bluetooth card and pull it straight out its socket. Do not use excessive force to pull the end of the AirPort/Bluetooth card away from its socket on the logic board. Doing so may damage the socket. When reinstalling the card, be sure it is properly seated before reinstalling the retaining screws.
    • Slightly lift the AirPort/Bluetooth card and pull it straight out its socket.

    • Do not use excessive force to pull the end of the AirPort/Bluetooth card away from its socket on the logic board. Doing so may damage the socket.

    • When reinstalling the card, be sure it is properly seated before reinstalling the retaining screws.

    • If the AirPort/Bluetooth card is properly seated, its screw holes should align with those on the logic board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Membro desde: 05/02/2015

196.689 Reputação

178 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

128 Membros

13.116 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 78