Introdução
Prerequisite for removing the logic board from a 21.5" Retina 4K 2019 iMac.
O que você precisa
-
-
Gently pull the left speaker cable straight out of its socket on the logic board.
-
-
-
-
Use the tip of a spudger to flip open the retaining flap on the microphone ribbon cable ZIF socket.
-
Use tweezers to gently pull the microphone ribbon cable straight out of its socket.
-
-
-
Remove the four 7.3 mm T8 Torx screws securing the logic board to the rear enclosure.
-
Quase terminado!
To reassemble your device, follow these instructions in reverse order.
Conclusão
To reassemble your device, follow these instructions in reverse order.