Introdução

Use this guide to replace the access door on the bottom edge of your iMac.

Peças

Não são necessárias peças.

  1. Unplug your iMac's AC cord along with any peripheral devices.
    • Unplug your iMac's AC cord along with any peripheral devices.

    • Lay your iMac face-down on a soft, clean surface as shown.

    • Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.

    • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

    • All three screws will remain captive in the access door.

    • Remove the access door.

    Before beginning unplug your iMac.

    Henry Barnett - Responder

    The screws are not phillips #1 as implied above. My phillips#2 bit fit.

    John McWilliams - Responder

    Yes phillips #2 is the correct Bit

    Heath - Responder

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
Conclusão

To reassemble your device, follow these instructions in reverse order.

8 outras pessoas concluíram este guia.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 36

Todo: 5,985