Ir para o conteúdo principal

Introdução

If your iMac G4 17 800 MHz EMC 1936 is in need of a RAM upgrade or it has failed in some way, follow this guide to replace the RAM.

Be sure to turn off your computer and unplug it prior to beginning your repair.

  1. Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.
    • Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.

  2. Loosen the four Phillips #0 screws.
    • Loosen the four Phillips #0 screws.

  3. Carefully remove the base access panel.
    • Carefully remove the base access panel.

  4. Remove the RAM from the slot. Remove the RAM from the slot.
    • Remove the RAM from the slot.

Conclusão

To reassemble your device, follow these instructions in reverse order.

14 outras pessoas concluíram este guia.

David Hunter

Membro desde: 05/10/2011

635 Reputação

4 Guias de autoria

Equipe

Cal Poly, Team 21-22, Maness Fall 2011 Membro de Cal Poly, Team 21-22, Maness Fall 2011

CPSU-MANESS-F11S21G22

4 Membros

13 Guias de autoria

We need to show the RAM being taken off

David Hunter - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 15

Duração total: 4,570