Pular para o conteúdo principal

Peças

Nenhum componente especificado.

  1. Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.
    • Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.

  2. Loosen the four Phillips #0 screws.
    • Loosen the four Phillips #0 screws.

  3. Carefully remove the base access panel.
    • Carefully remove the base access panel.

  4. Apple Watch Kits

    Screen and battery repairs just got easier.

    Comprar agora

    Apple Watch Kits

    Screen and battery repairs just got easier.

    Comprar agora
  5. Remove the four 25mm T-15 screws. Remove the four 25mm T-15 screws.
    • Remove the four 25mm T-15 screws.

  6. Open the housing plate. Be gentle with the wires still connected to the logic board  so as not to ruin the cables.
    • Open the housing plate.

    • Be gentle with the wires still connected to the logic board so as not to ruin the cables.

    • A fixed plug connector between the logic board and upper unit will cause some resistance. Pull gently but firmly.

  7. Remove the 2 torx 10mm screws on the EMI shield Carefully remove shield and copper tape Carefully remove shield and copper tape
    • Remove the 2 torx 10mm screws on the EMI shield

    • Carefully remove shield and copper tape

  8. Remove the 4 10mm torx screws attatched to the drive carrier. The drive carrier includes optical drive and hard drive.
    • Remove the 4 10mm torx screws attatched to the drive carrier.

    • The drive carrier includes optical drive and hard drive.

  9. Grasp the carrier with both hands on each side.
    • Grasp the carrier with both hands on each side.

    • Remove the carrier by lifting up and out.

    • Pull gently but firmly. The carrier is meant to fit snugly.

  10. Flip the removed carrier to the right and pull out power cables.
    • Flip the removed carrier to the right and pull out power cables.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Courtney

Membro desde: 06-10-2011

776 reputação

3 Guias de autoria

Equipe

Cal Poly, Team 21-22, Maness Fall 2011 Membro de Cal Poly, Team 21-22, Maness Fall 2011

CPSU-MANESS-F11S21G22

4 Membros

13 Guias de autoria

What two screws in step 6

David Hunter - Responder

We need a "action" shot; we need to show an actual screwdriver unscrewing the screw.

David Hunter - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 4

Todo: 1,799