Conserte seus objetos Comunidade Loja

iBook G3 14" Airport Card Replacement

Introdução

Install an original Airport 802.11b card internally.

O que você precisa

  1. iBook G3 14" Airport Card Replacement, Battery: passo 1, imagem 1 %32

    • Use a coin to rotate the battery locking screw 90 degrees clockwise.

    • Lift the battery out of the computer.

    Editar

  2. iBook G3 14" Airport Card Replacement, Airport Card: passo 2, imagem 1 %32

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    • If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.

    • Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

    Editar

  4. iBook G3 14" Airport Card Replacement: passo 3, imagem 1 %32

    • If your computer does not have an Airport card installed, skip to the RAM shield removal step.

    • Push the wire clasp toward the Airport card and pull it up to free it from the RAM shield.

    Editar

  5. iBook G3 14" Airport Card Replacement: passo 4, imagem 1 %32

    • Grasp the clear plastic tab on the Airport card and pull toward the right.

    Editar

  6. iBook G3 14" Airport Card Replacement: passo 5, imagem 1 %32

    • Hold the Airport card in one hand and use your other hand to remove the antenna cable.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

Documentos anexados

Autor(a)

com 2 outros contribuidores

iRobot

Membro desde: 09/24/09

1 Reputação

Autoria de 636 guias

Emblemas: 36

+33 outros emblemas

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 4

Últimos 30 dias: 10

Duração total: 8,006