Pular para o conteúdo principal
Ajuda

iMac Intel 27" EMC 2309 and 2374 Access Door Replacement

iMac Intel 27" EMC 2309 and 2374 Access Door replacement.

  • Autor: Andrew Bookholt
  • Tempo estimado: 1 - 10 minutos
  • Dificuldade: Fácil

Remove the access door to replace RAM modules.

Passo 1 Access Door  ¶ 

Loosen the three Phillips screws securing the access door to the bottom edge of your iMac. These screws will remain captive in the access door.

Passo 1 Access Door  ¶ 

  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • These screws will remain captive in the access door.

  • Remove the access door from your iMac.

  • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.