Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 9 —

Tipo de Passo:

Arraste para reorganizar

Move the piece of tape so that it no longer covers the remaining two leads. If you are satisfied with the position of the cable relative to the pads on the board, proceed. If not, de-solder the first connection and try again.

Solder the two remaining pads to the logic board, being mindful of overheating the cable or board.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.