Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos


Editando passo 6 —

Tipo de Passo:

Arraste para reorganizar

As the 6 series is slightly higher we need to make a little space on the plastic holder which is beneath the card

Remove the plastic part which is shown on the 2nd picture by removing one screw and carefully pull it from the aluminium case

Its fastended with tape, so don't worry, you can't break anything

Some wiggling and navigating it from the cables and you should have it in your hands

You see the rectangular space where the large cable goes through. Use a saw or other tool to make it about 5mm wider and 2-3mm deeper

The third image shows the final result we want to achieve

The primary reason for thi step is the heatpipe of the 6 series which takes more space

Note: this is ONLY necessary on the late 2009 model, 2010 models already got enough room!

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.