Pular para o conteúdo principal
Ajuda
Editando passo 17 —

Tipo de Passo:

Arraste para reorganizar

Locate and remove the one screw from the lower left of the Power Supply using the 2.4 mm Flathead Screwdriver.

Locate and remove the two screws from the metal guard anchoring the lower right side of the Power Supply using the 3.0 mm Flathead Screwdriver.

Remove metal guard.

Locate plastic guard along the top of the Power Supply.

From the far right lower corner, tilt the plastic guard upwards and lift free of the Power Supply.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.