Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Ajuda
Editando passo 2 —

Tipo de Passo:

Arraste para reorganizar

Using a soldering iron set at 400 degrees Celsius (752 degrees Fahrenheit), heat the solder joints lateral to the USB port. Use a pair of tweezers to lift the port from the board.

Extreme caution should be taken when working with high-temperature equipment to reduce the chance of burns.

Care should be taken while desoldering the joints as the heat could melt the plastic casing on the port. It is strongly recommended that soldering surface-mounted components guide is referenced before proceeding.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.