Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 1 —

Tipo de Passo:

Arraste para reorganizar

If this guide is used as a prerequisite, the hard drive may not need to be removed.

The I/O daugherboard can be removed if it is in the way.

Disconnect the flat flex cable over the hard drive. To do this, lift the black locking tab up and remove the cable from the ZIF socket.

To remove the hard drive, tilt it forward starting with the SATA interface. Once it is removed, set it aside as shown.

Disconnnect the drive cable. Wiggle the cable off until it is released. Do not forcefully remove the cable. Unserviced systems may be on tighter then a serviced one.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.