Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

Editando passo 13 —

Tipo de Passo:

Arraste para reorganizar

Disconnect the camera from the motherboard. There are 1.5mm gaps on either side of the connector between the connector and its port. Put the pointed end of the spudger in one gap at a time and "walk" the connector out by wedging out the connector on each side.

If it is difficult to pry out the connector completely with the spudger, you may remove it by hand.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.