Skip to main content
Editando passo 5 —

Tipo de Passo:

Arraste para reorganizar

Unsolder all the capacitors and remove them. In this repair a 30watt soldering iron and solder sucker was used. The solder sucker can be substituted with soldering wick.

Solder all the capacitors in their respective places. On the logic board, where the capacitors are located, is an outline of a circle with one part of the circle being heavier. It corresponds with the negative lead of the condenser.

Once all the capacitors are replaced, double check the board to make sure everything is properly mounted.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.