Ir para o conteúdo principal
Editando passo 9 —

Tipo de Passo:

Arraste para reorganizar

If there's no retaining screw and you anticipate forceful counterclockwise action (as when unscrewing), apply a small amount of threadlocking compound to the spindle thread.

Use a medium-strength variety, not the kind you'll have to heat with a blowtorch if you need to take off the chuck again at a later stage!

Screw the chuck onto the spindle as far as it will go. You don't need to tighten it with excessive force, it will tighten itself with normal use.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.