Ir para o conteúdo principal
Ajuda
Editando passo 11 —

Tipo de Passo:

Arraste para reorganizar

Fortunately, there is enough room on the strip to solder in new LEDs (red arrows) along with their 220R resistors (green arrows) on the original solder pads. It's ugly, but it works. You have to use resistors in 0603 package to fit them into the available space.

Note that I also desoldered the original 22R resistors and shorted their pads with a thin wire (purple arrow).

You can verify that all three new LEDs work by connecting a 5V power supply onto "A" and "K" pads on the strip.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.