Skip to main content
Editando passo 3 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Tipo de Passo:

Arraste para reorganizar

Push the tip of a spudger beneath the rubber adhesive and toward the battery to free it from the surface of the logic board.

Start freeing the adhesive from around one of the outer leads, then free it from the two gaps between leads, and finally push the spudger along the back side of the leads to completely remove it from the logic board/battery leads.

The battery leads are delicate, so be careful to not tear them while removing the black adhesive.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.