Pular para o conteúdo principal
Ajuda
Editando passo 5 —

Tipo de Passo:

Arraste para reorganizar

Install a retainer and grommet onto the new strut if there isn't one already installed.

Orient the retainer so that the cupped side faces away from the shock body. Orient the grommet so that the side with a protrusion points away from the strut body.

Insert the strut up through the lower control arm.

Ensure that the threaded end of the strut goes through the hole in the upper control arm.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.