Ir para o conteúdo principal
Ajuda
Editando passo 12 —

Tipo de Passo:

Arraste para reorganizar

Plug the wheel cover back onto the mainboard. Then, carefully align the cover with the screw posts on Bob.

Make sure the springs on top of the wheels do not move out of place and no other wires will be compressed beneath the wheels' cover as you push it down.

When the cover sits flat against Bob, reinstall all of its 6 screws. Hold the cover down against bOb as you do so.

Replace the main brush motor if you have removed it before you begin closing Bob.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.