Skip to main content
Help
Editando passo 3 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 16 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

Insert the flat end of a spudger into the gap.

The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, rock the screen up and down to weaken the adhesive until you can fit a spudger inside.

While pulling up on the suction cup, twist the spudger to widen the opening between the screen and rear case.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.