Pular para o conteúdo principal
Ajuda
Editando passo 6 —

Tipo de Passo:

Arraste para reorganizar

When inserting the headlight assembly back into the housing, make sure that the housing locator guides fit into the catches on both sides of the assembly.

Push the assembly into the housing until you hear it click into place.

Again use the 5mm nut driver to turn the locking nut that locks the assembly in its housing.

Turn on the ignition and check that the new bulb works. Close the hood.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.