Pular para o conteúdo principal
Ajuda
Editando passo 5 —

Tipo de Passo:

Arraste para reorganizar

Remove the spark plug cap from cylinder 1 by grabbing the plug cap boot and pulling straight out.

Do not remove the cap by pulling on the wires, you risk ripping the wire out of the cap.

Use a 5/8" spark plug driver, a socket extension and a socket wrench to remove the spark plug. Press the spark plug driver firmly onto the spark plug until you feel it "grab" the plug and turn it counter-clockwise until you can pull it out of the cylinder head.

Be careful not to drop anything down the spark plug hole and into the cylinder! If something falls into the cylinder you will have to do a complete cylinder tear down to remove what ever was dropped!

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.