Pular para o conteúdo principal
Ajuda
Editando passo 1 —

Tipo de Passo:

Arraste para reorganizar

Since the jacking location on the Accord isn't large enough to fit both a jack and a jack stand, you must raise the car by placing the jack on the front subframe.

Place a jack on the round portion of the front subframe on the driver side of the car, just inside the wheel and just outside of the front sway bar bushing.

Raise the car until you have enough room to work comfortably underneath it.

Place a jack stand under the front jacking location, the reinforced metal part of the vertical crossbeam, and lower the car onto the jack stand. Remove the jack from under the car.

Never work under a car that is only supported by a jack. The jack may slip or fail, resulting in serious injury or death.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.