Skip to main content
Editando passo 28 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 2 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

As you complete the next few steps, prying adhesive securing the logic board in place, always start by testing gently to see if the adhesive is softened. If not, reheat the iOpener and reapply it to the back of the rear case.

Carefully insert an opening pick under the logic board, between the front-facing camera and the battery.

Be sure to insert the pick over the the antenna cable that runs along the length of the battery.

Slide the guitar pick toward the front-facing camera connector, and stop at the bend in the logic board.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.