Skip to main content
Help
Editando passo 4 —

Tipo de Passo:

Arraste para reorganizar

The various mounting posts inside the iMac were not suitable, so I purchased some PCB self-adhesive mounting posts (9.5mm) to mount the driver board, inverter and controller board.

To ensure the mounting posts were mounted correctly, I cut squares out of the EMI shielding before attaching the posts to the inner of the iMac casing. I also drilled holes for the power / adjustment board, so the buttons could be accessed from the rear of the machine.

From here it was a just a matter of attaching the boards to the PCB posts, hooking up the various cables and feeding through them through the former power in cut-out. I also insulated under the LCD driver board, as it was a bare circuit board. The inverter came contained within a clear plastic case.

As with the original setup, the LVDS cable and bottom inverter cables could only be attached with the screen in place.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.