Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 8 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Tipo de Passo:

Arraste para reorganizar

The two delicate cable connectors are reconnected to the PCB by offering them into place then gently pressing them back onto their respective connections with the aforementioned wooden implement.

The larger of the three connectors slides back into its socket without trouble.

Offer the power cable and socket back into its holder on the inside of the case.

Reattach the metal plate using the four screws removed earlier with the Torx T8 screwdriver.

Finally, clip the black plastic base back on to close the unit up - and it's time to test...

Launch Airport Utility to check the disk is recognised OK, and erase it if necessary.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.