Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

Editando passo 35 —

Tipo de Passo:

Arraste para reorganizar

Use a spudger to pry the metal rings on the battery terminals up so that they perpendicular to the battery terminals.

These rings should be on the same end as the surface mount leads. If they are on opposite ends, the board is on backwards, and you'll need to unscrew the nuts, rotate the circuit board 180°, reinstall the nuts, and tighten the two screws.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.