Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos


Editando passo 19 —

Tipo de Passo:

Arraste para reorganizar

The next component we will be installing is the yellow capacitor. Capacitors store electrical charge, and are helpful when a circuit needs a quick shot of energy to illuminate a light or make a beep.

Capacitors are measured (in Farads) as the ratio of the electrical charge on each conductor to the potential difference between them. This capacitor is a 1 µF capacitor.

Install the capacitor in the terminal next to the IC socket marked C1. Soldering the leads of a capacitor follows the same through-hole procedure used thus far.

Make sure that the printed markings on the capacitor face away from the IC socket so that you can still read it.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.