Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos


Editando passo 7 —

Tipo de Passo:

Arraste para reorganizar

Use the same method above to solder the second resistor lead to the circuit board.

After soldering a joint, if you are going to put the soldering iron down, be sure to place it back in its stand to prevent burning yourself or anything around you.

Cut the extra lengths of the resistor leads with a pair of wire cutters. NASA workmanship standards state that any length up to 2.29 mm is acceptable.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.