Ir para o conteúdo principal
Editando passo 2 —

Tipo de Passo:

Arraste para reorganizar

When you have finished removing all of the screws, place the plastic opening tool in the groove at the bottom left corner of the motherboard cover and lift up.

This part could be more difficult if you have never removed the motherboard cover. If difficulty arises, pry the plastic opening tool into each groove along the edge of the motherboard cover until it releases.

Once a clip is released, you can detach the motherboard cover with your fingers and set aside.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.