Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 5 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Tipo de Passo:

Arraste para reorganizar

If your replacement headphone jack includes the white plastic hold switch, simply reinstall the headphone jack. If your replacement part does not include the plastic hold switch, follow the next steps to transfer the plastic hold switch to your new headphone jack.

If you're just trying to remove the rear panel, you can skip Steps 15 and 16.

Remove the single Phillips screw nearest to the hold switch. Note: You may find adhesive holding the back of the screw in place.

Lift the plastic portion of the Hold switch away from the orange ribbon cable.

Ensure that the black notch lines up with the gray slider during reassembly of the switch (see picture 2).

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.