Pular para o conteúdo principal
Ajuda

Tipo de Passo:

Arraste para reorganizar

Remove the LCD connector from the motherboard by pulling up on the black tap which is located on top of the connector. (See pic 1)

There are 2 wires that run from the LCD assembly to the Wi-Fi card. There is a black and white wire. Using a spudgeryou can carefully navigate under both gold tips of the black and white wires and then lightly pry them off in an upwards motion.

Unwind/remove the black and white wires from their original black clip path which are secured around the fan. There are also 1 metal clip attached to the bottom of the palmrest. (See pic 3)

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.