Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos


Editando passo 5 —

Tipo de Passo:

Arraste para reorganizar

You should now remove the metalised foam block located under the metal frame near the top HDD mount. Then GENTLY pull the wires out from under the metal frame to expose the connector

I used an Allen key as a hook to do this. The wires may be secured with tape. If so use a spudger or other non sharp tool to lift or break the tape to free the wires

The wires from the power supply to the connector are JUST long enough to allow disconnecting the connector. REMEMBER this when you install new Power supply to avoid damaging it

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.