Skip to main content
Editando passo 1 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 12 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Before proceeding, unplug and power down your MacBook. Close the display and flip it upside-down.

2015 models only: To avoid logic board damage, when your MacBook repair is complete but before powering it on, connect it to low-voltage power using a 5-Watt iPhone charger and a USB-C to USB-A cable.

Remove the following eight screws securing the lower case:

Two 1.8 mm P5 Pentalobe screws

Four 2.9 mm P5 Pentalobe screws

Two 6.1 mm P5 Pentalobe screws

Note the orientation of the screws as you remove them—they need to be reinstalled at a slight angle.

Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.