Pular para o conteúdo principal
Ajuda
Editando passo 3 —

Aviso: Você está editando um pré-requisito ao guia que você estava consultando. Quaisquer alterações que você faça afetarão todos os 18 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Use the clear plastic pull tab to gently lift the battery out of the iPhone.

If the tab breaks before the battery is freed, carefully slide a spudger under the battery tab to release the adhesive. Prying in other places may cause damage.

If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from the the ribbon cable.

Before reconnecting the battery connector, be sure the contact clip (shown in red) is properly positioned next to the battery connector.

Before reassembly, clean metal-to-metal contact points with a de-greaser such as windex. The oils from your fingers have the potential to cause wireless interference issues.

Perform a hard reset after reassembly. This can prevent several issues and simplify troubleshooting.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.