Pular para o conteúdo principal
Ajuda
Editando passo 5 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Tipo de Passo:

Arraste para reorganizar

The EMI filter is connected by three screws. Use the T10 screwdriver to remove them.

The screw that holds in both the filter and a wire that is connected to it is a different size and should be kept identifiable from the other two screws.

The green and yellow wire that was held in by the different screw is tucked behind another component. To get it out, squeeze it behind the black wire and the filter will be able to be removed from the casing.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.