Ir para o conteúdo principal
Ajuda
Editando passo 2 —

Tipo de Passo:

Arraste para reorganizar

You will need to remove the keyboard and palmrest screws, which require the use of a Torx T8 or flathead screwdriver.

If your N400c or N410c still has this screw, then you must use a screwdriver of the aforementioned Torx size.

If you find any Philip head screws holding the keyboard and/or palmrest in place instead of the Torx ones, then the system most likely had those screws replaced at one point in time.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.