Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 3 —

Tipo de Passo:

Arraste para reorganizar

With both ribbons out of the way, you can now lift the motherboard off of the tablet with your hand.

The camera is attached to the back side of the motherboard via a ribbon cable.

Use a spudger or your fingernail to disconnect the camera from the motherboard.

There is a small board that comes off easily with the camera. It is attached to the camera with a ZIF connector, and will need to be swapped over to the replacement camera.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.