Pular para o conteúdo principal

Tipo de Passo:

Arraste para reorganizar

Since the calibration will be erased if the printer errors out, wait until the printhead is bone dry before installation. Printhead initialization uses 1/2 of your ink (non-XL).

While the printhead will not be seen as "new", a unavoidable Printhead Preparation process must run.

Once the printhead is satisfactorily dry, reinstall the printhed and ink in the reverse order they were removed. Plug the printer in when installed.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.