Ir para o conteúdo principal
Ajuda
Editando passo 3 —

Tipo de Passo:

Arraste para reorganizar

Carefully remove the green sticker over the four soldering pads

There is some double sided tape behind the marked part. Do not rip the flexible PCB or you will easily damage the soldering pads as I did.

Heat up the pads either all at once and lift them up from the end of the PCB first or try to start from one side and 'roll' up the PCB from one side to the other.

If you rip a soldering pad like I did, you still can repair it provided some good eyesight...

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.