Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 1 —

Tipo de Passo:

Arraste para reorganizar

Carefully peel back the two copper sticky grounding strips near the LED module.

Swing the outer aluminium case up and carefully slide it towards the connector side of the logic board until it comes off. Remove the two Phillips #0 screws securing the LED module.

Carefully unplug the module from the logic board and remove it from the case.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.