Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 5 —

Aviso: Você está editando um pré-requisito ao guia que você estava consultando. Quaisquer alterações que você faça afetarão todos os 2 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Flip the iPhone back over and thread a piece of dental floss or strong string behind the battery. Then, slowly pull back and forth in a sawing motion to separate the adhesive.

A stronger alternative to floss is an unwound guitar string, such as a 0.009 E string from a 12-string set.

Alternatively, insert a plastic card between the case side of the battery and the rear case.

Do not insert your card in the area between the volume down (-) button and the top edge of the battery, or you may damage the volume control cable lying underneath.

Do not pry against the logic board or you may damage the phone.

Keep the card as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals or catch fire. Do not use any sharp tools to pry at the battery.

Press the card in farther to break up the adhesive behind the battery.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.