Ir para o conteúdo principal
Ajuda
Editando passo 1 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 3 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Use a heat gun to soften the adhesive underneath the camera/microphone cover.

Pry the camera/microphone cover off the case with a metal spudger and remove it.

It is extremely difficult, if not impossible, to avoid damaging the iPod case near the camera. While this will not affect the iPod's functionality, it will hurt its cosmetic appearance.

You can try this alternative method for removing the cover:

Use a hot glue gun to apply a bead of glue across the cover.

Move the nozzle in the glue for 20 seconds to heat the lens adhesive holding the lens in place.

Press a spudger into the hot glue and hold it in place until the glue cools and hardens.

Pull on the spudger with firm steady force, while using a fingernail to pry on the cover edge.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.