Ir para o conteúdo principal
Ajuda
Editando passo 1 —

Tipo de Passo:

Arraste para reorganizar

Remove the following screws securing the logic board to the rear case:

Two 2.4 mm standoff screws

Standoff screws are best removed with a standoff screwdriver or standoff driver bit. A small flathead screwdriver can also do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

One 2.1 mm Phillips #00 screw

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.